CLC 15-150 A/B

A two component, heat cure epoxy system specifically developed for use on instrument and power transformers. The cured material exhibits excellent thermal stability and thermal cycling endurance. Product meets UL 94-HB flammability requirements. CLC 15-150 A/B

CLR 1157 / CLH 5515

Heat Cure Semi-Rigid Epoxy Transformer Casting System. Increased flexibility when compared to CLR 1331 / CLH 5515 family. System exhibits excellent thermal stability and thermal cycling performance. A two component, heat cure epoxy system specifically developed for use on instrument and power transformers. Product meets UL94-HB flammability requirements. CLR 1157 / CLH 5515

CLR 1180 / CLH 6520

Flexible epoxy casting and potting system. An unfilled, semi-flexible epoxy casting system with long pot life. This product may be used in large mass casting. CLR 1180 / CLH 6520

CLR 1190 / CLH 6560

Low viscosity, RT cure. Impact resistant. Excellent thermal cycle. An exceptionally tough epoxy casting system with excellent low temperature thermal and mechanical shock resistance. CLR 1190 / CLH 6560

CLR 1556 / CLH 6640

Room Temperature Cure, filled epoxy system suitable for machine dispense. Developed for potting and casting of electrical and electronic components. The cured material exhibits excellent thermal cycling endurance. CLR 1556 / CLH 6640

CLR 3507 / CLH 6230

A semi-flexible, 100% solid, epoxy system. This product was specifically developed for potting / casting of electrical and electronic components. The long pot life of the material makes it suitable for large mass castings or heat induced curing with minimal stress. Product passes UL94-HB in-house flammability testing. For a more rigid system, CLR 3517 / CLH 6230 is recommended. CLR 3507 / CLH 6230

CLS 9611

A low viscosity, single component, epoxy potting and encapsulating compound. The product has excellent stability and good adhesion to a wide range of substrates. This product meets UL 94-HB flammability requirements. Heat Cure Single Component semi-flexible epoxy potting and encapsulating system. Product is suitable for potting ferrites and pressure sensitive components in electrical and electronic applications. CLS 9611

CLS 9616

Heat Cure. Single Component semi-flexible epoxy potting and encapsulating system. Product is suitable for potting ferrites and pressure sensitive components in electrical and electronic applications. Low viscosity. The product has excellent stability and good adhesion to a wide range of substrates. This product meets UL94-HB flammability requirements. CLS 9616

XRD 1018 / XHD 1019

1:1 Mix Ratio, 130°C Operating, General Purpose, Low cost. A two component, room temperature cure semi-flexible, flame retardant, epoxy system. The system was developed for potting/casting of electrical and electronic components. Its use of non-abrasive fillers and convenient 1 to 1 ratio by volume, make it ideal for use in machine dispensing equipment. This product meets UL94-V0 in house flammability testing. XRD 1018 / XHD 1019